Low Gloss Surface Powder Coating

Low Gloss Surface Powder Coating 1.good edge covering rate 2.excellent impact resistance 3.enco-friendly

Low Gloss Surface Powder Coating

Mainly composed of the epoxy resin and polyester resin,has super chemical resistance and mechanical properties.It can be used in painting those metal products that have special requirement of corrosion resistance,electric insulativity.

Test Item	Test  Standard and  Method	Test     Index
Impact Resistance	GB/T 1732-1993         ISO6272	50km.cm
Adhesion(cross-cut)	GB/T  9286-1998        ISO2409	class0
Flexibility	GB/T  6742-2007        ISO1519	2mm
Pencil  Hardness	GB/T   6739-2006       ISO15184	1H-2H
Cupping   Test	GB/T  9753-2007        ISO1520	6mm
Salt Apray Resistance	GB/T  1771-2007        ISO7253	>400Hours
Heat&Humidity Resistance	GB/T  1740-2007        ISO6270	>500Hours(film gloss slightly lose)

Note:1.The tests above used the cold rolling steel plate of 0.8mm thick with preceding standard treatment ,the thickness of the coating layer is 60-80um. 2.The above performance index may slightly vary with the variation of the product types and artistic effects.

Storage

1.Stacking in Ventilate,dry and clean place.

2.Temperature should be below 28°c.

3.Keep out of the fire source,heating ,directly sunlight.

4.Stacking in the open-air is prohibited.

5.The shelf-time:12months(above this condition)

Low Gloss Surface Powder Coating